Norsk Standard MFM

NS-EN 474-1:2006+A3:2013

EN 474-1 :2006+A3:2013 (E)

Annex E (normative)

Requirements for lifting device(s) used for object handling application

E.1 General

This annex specifies requirements for lifting device(s) on earth-moving machines used in object handling operations with regard to strength, assembly and operation.

The tests as defined in this annex may be replaced by calculation.

E.2 Terms, definitions and abbreviations

E.2.1

lifting device(s) device fixed or incorporated to the attachment (working tool) or equipment of the earth-moving machine used for object handling

E.2.2

sling assembly of slinging components, e.g. chain, wire rope or textile material (see EN 1492-1:2000 and ~EN 1492-2:2000 ~),joined to upper or lower terminals suitable for attaching loads to the lifting point

E.2.3

rated lifting load (RLL) maximum mass for which the lifting device(s) are designed

NOTE

The rated lifting load (RLL) can be different from the rated operating/lift capacity of the machine.

E.2.4

attachable hook component intended to be fixed to the attachment (working tool) or the equipment of the earth-moving machine either welded or bolted

E.3 Safety requirements

E.3.1 Mounting and fixing

The lifting device(s) shall be so positioned on the attachment or the other parts of the earth-moving machine that an unintentional unhooking of the sling is avoided. (For test see E.4.2.)

The location at the attachment or the equipment shall provide best visibility between the operator and the ~slinger~ [operator to attach the sling to the lifting device(s)].

46