Norsk Standard MFM

NS-EN 474-1 :2006+A3:2013

EN 474-1 :2006+A3:2013 (E)

For lifting symbol, see ISO 6405-1:2004, symbol 7.23.

5.15.5 Towing

Towing device(s) (hooks, ears etc.) shall be provided on the machine. They shall comply with ISO 10532:1995. Their location, permissible forces, the correct use when towing as well as the maximum towing speed and distance shall be clearly specified in the operator's manual.

If a pin is part of the towing device, the pin shall be permanently attached to the device. The securing device for the pin shall not be detachable.

5.15.6 Transportation

Stabilisers, outriggers or other moveable devices that can cause a hazard during transportation or travelling shall be secured lockable in their transport position.

Instructions for secure locking shall be provided in the operation manual.

5.16 Electro-magnetic compatibility (EMC)

Earth-moving machines shall comply with the requirements of electromagnetic compatibility as specified in EN 13309:2000.

The antenna shall be located successively on the left- and right-hand sides of the earth-moving machine, with the antenna parallel to the plane of the longitudinal symmetry of earth-moving machine and in line with:

a) for diesel engines: the SIP (see EN ISO 5353:1998), see Figure 4;

b) for spark ignition engines: the engine mid-point, see Figure 5.

~"""

24